Aputure MC 4-Light Travel Kit with Charging Case

Lights & Movie Equipment Rental
Quasar LED Rainbow Lights

Quasar Power Cluster

Arri Skypanel S30-C

Wireless Charging
Q-Lion Lights 

SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 1 kW tungsten soft light or a 3 kW tungsten space light, the SkyPanel S30 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.

Key Features
Manual Yoke
Panel Surface Area: 14 x 11.8"
110° Beam Spread
Color Temperature from 2800-10,000K

Wireless Charging Station

The Aputure MC is Aputure’s first RGBWW film light. This light features full HSI color control and a CCT range of 3200K-6500K, giving you a full range of color options in a footprint roughly the size of a credit card, allowing it to fit in anywhere. 

Built-in Sidus Mesh technology also allows you to use the Sidus Link app to unlock all of the light’s capabilities. As the first color-mixing M-Series light, the MC offers filmmakers immense flexibility.

Single End Power Input: Providing a clean appearance and easy to cable light without the need for overly complicated wiring looms that become a spiderweb, tangling themselves around stands and costing time and energy to both straighten and dress out of view.

Our Cluster Power Adapters can disconnect at the head to allow for easy storage.

Lamp Options: 6, 4, 3, 2 & Single Lamp Configurations Available.

Power Options:  
- Quasar Bi Pin G13 to SWITCH to Polarized Male Plug
- Grounded Tri-Pin G13-GR to SWITCH to Grounded Male Plug

The Rainbow Linear LED Lamp featuring RGBX can paint your world with vibrant saturated color and illuminate it with powerful white light from our 2000° Candlelight to 6000° Daylight Kelvin. All Rainbow Lamps are 1 pixel and equipped with onboard digital interface giving you command of Intensity, Kelvin, Hue & Saturation. Each lamp has a built in Lumen Radio CRMX chip for wireless control. The Rainbow can also be wired to DMX via Cat5 I/O Port. The lamp is Self Ballasted AC input utilizing Neutrik True1 locking connector as well as locking Barrel connector for DC input. Features: X-fade White Light: Crossfading our Candlelight diode (2000k) and Daylight diode (6000k) mixing a balanced variable color spectrum. The Rainbow comes equipped with an on-board control panel allowing you to set Intensity, CCT, Saturation, Hue, FX and much more. FX: Onboard effects with adjustable parameters. Including Fire, Police Light, Short Circuit, Paparazzi, Strobe 
Lengths: Q5 - 7" 5 watts - 3,550 mAh LiOn Battery Q10 - 12" 10 watts - 6,400 mAh LiOn Battery Q20 - 24" 20 watts - 12,800 mAh LiOn Battery Color Temp: 3000K/4300K/5600K Press and hold the power button to alternate between color modes. Dimming Levels: 100%, 75%, 50%, 25%, 10% OFF A single button press cycles through the dimming levels Features: Magnetic Feet M10 Threaded Receiver (Threaded Pin available here) NEW Recessed Power Button (V3) Kill switch to disable power button when traveling (V3) Power: Rechargeable Lithium Ion Battery Charges from Mirco USB power adapter - V3.0 -9V @2A / 12V 1.5A -(Will not charge on standard 5v USB Charger) Battery Level Indicator Runs for about 4 hours at 100%. Flicker Free 25,000 + Hour Lifetime

Tile Lights:

Operation: Press button once to turn on. Press multiple times to dim. Press and hold to change from 3000k to 5600k. To disable the Power Button when traveling, using a pen, press and hold the the KILL button button on the side for 5 seconds. To enable the Power Button after it has been killed, plug it into your charger. To Reset the lamp to default settings of 5600k and 100%, press the RST button. If the Q-Lion LED will charge but will not turn on with a button press, press and hold the kill button for 5 seconds. Then plug back into the QC 3.0 Charger.


Crossfade Linear LED Lamps
Crossfade Linear LED Lamps With the Crossfade, tune the lamp from our beautiful 2000° Kelvin Candle Light all the way through to our 6000° Kelvin Overcast Daylight. Whether lighting actors or lighting environments, the versatility is undeniable. Stack lamps into large arrays to form LED panels of tremendous size and proportion. Light backings with unprecedented energy efficiency. to cable more then 12 feet / 3 Meters from the power source where line loss effects the output and performance of the LED luminaire. Energy Efficiency: At 90+ lumens per watt the lamps vastly outperforms Quartz, Halogen, Plasma and HMI lighting sources in the luminous output to power consumption ratio.

"Equipment Arrived On Time. Gus Bros Is My Go To Team Because They Are Very Easy To Work With..."

- John Thompson, Set Director
"Great To Work With, They Always Make Sure Everything Is Right!"

Tim Scott, Set Director
"Professional, Reliable, and They Come Through In The Clutch."

Roberto Arte, Set Director
"David and His Team Are Reliable and also Provide Us With The Best Price and Service..."

- Tina Timmons, Set Director
"Thanks Guys! Excellent Service As Always!"

Julie Choi, Set Director
Why Choose Us?
We are a family owned business of Sprinters, Grips, Lighting, and Production Support Professionals. 

We have been in the movie industry behind the scenes since 1980's. 

We have grown with the industry from generation to generation. 

We know and use the latest technology on a regular basis and we know what works. 

You can count on us to deliver every time.

If you need anything for a set, grip, lighting or any kind of support we are here for you. 

If we don't have it, we can probably get it, click the button below to contact us.

We Offer Quality Products and Great Service.

© Copyright 2020 Gus Bros Lite.com
Gus Bros Lite Was Established In 2016 By David Gordon. Our Mission Is To Provide Quality Products and Great Service at Competitive Prices.